Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.
The Mishimoto Ford Fiesta ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Thousands of test miles were logged on our Fiesta ST to determine what can setup would work the best. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield nearly no accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Fiesta ST's on the road. The Mishimoto Ford Fiesta ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses with pre-assembled quick-disconnect fittings for a simple installation. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.
- Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter
- Silicone hoses include pre-attached stock-style quick-disconnect fittings for plug and play install
- Offered with black, blue, or red silicone hoses that come pre-molded for a reliable install
Application Summary:
| Year |
Make/Model |
| 2014-2019 |
Ford Fiesta |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Black, Black, Black |
| Country of Origin (Primary) |
CN |
| Drain Plug Included |
Yes |
| Feature Bullet 1 |
Direct-fit for 2014+ Fiesta ST |
| Feature Bullet 2 |
Mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter |
| Feature Bullet 3 |
Direct-fit mounting brackets mount kit in front of engine bay |
| Feature Bullet 4 |
Patent pending billet 6061 aluminium can sealed with Viton O-rings |
| Feature Bullet 5 |
Mishimoto Lifetime Warranty |
| Finish |
Powder Coat, Powder Coat, Anodized |
| Hazardous Material Code |
N |
| Height |
3.7 |
| Hose Included |
Yes |
| Inlet Port Inside Diameter |
0.6 |
| Install Difficulty |
2, 2 |
| Installation Difficulty |
2, 2 |
| Interior Baffle |
Yes |
| Life Cycle Status Code |
Available to Order |
| Material |
6061 Aluminum, 6061 Aluminum |
| Maximum Can Capacity |
3 |
| Mounting Bracket Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Outlet Port Inside Diameter |
0.6 |
| SDR Required Flag |
N |
| SellingPoint01 |
Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter |
| SellingPoint02 |
Silicone hoses include pre-attached stock-style quick-disconnect fittings for plug and play install |
| SellingPoint03 |
Includes direct-fit hoses with pre-installed quick-disconnect fittings for simplified installation, Offered with black, blue, or red silicone hoses that come pre-molded for a reliable install |
| SellingPoint04 |
Application-specific bracket mounts the can in a serviceable location in the front of the engine bay |
| SellingPoint05 |
Billet 6061 aluminum sealed can |
| SellingPoint06 |
Defends intercooler, intake system, and essential components from oil blow-by |
| SellingPoint07 |
Reduces carbon build-up on the intake valves |
| SellingPoint08 |
Helps maintain proper octane levels to reduce potential detonation |
| SellingPoint09 |
Filter and can are fully serviceable |
| SellingPoint1 |
Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter |
| SellingPoint10 |
Internal air diverter turbulates air longer to improve oil separation |
| SellingPoint11 |
Mishimoto Lifetime Warranty |
| SellingPoint12 |
Patent Nos. US ZL 202120175368.7, US ZL 201830621732.1, US D884,760 |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| SellingPoint2 |
Silicone hoses include pre-attached stock-style quick-disconnect fittings for plug and play install |
| SellingPoint3 |
Offered with black, blue, or red silicone hoses that come pre-molded for a reliable install |
| SellingPoint4 |
Application-specific bracket mounts the can in a serviceable location in the front of the engine bay |
| SellingPoint5 |
Billet 6061 aluminum sealed can |
| SellingPoint6 |
Defends intercooler, intake system, and essential components from oil blow-by |
| SellingPoint7 |
Reduces carbon build-up on the intake valves |
| SellingPoint8 |
Helps maintain proper octane levels to reduce potential detonation |
| SellingPoint9 |
Filter and can are fully serviceable |
| TechSpec Applications |
N/A |
| TechSpec Catch Can Diameter (in) |
N/A |
| TechSpec Chassis Codes |
N/A |
| TechSpec Drain Plug Thread Size |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Height (in) |
N/A |
| TechSpec Includes |
N/A |
| TechSpec Inlet |
N/A |
| TechSpec Installation Notes |
N/A |
| TechSpec Material |
N/A |
| TechSpec Note |
N/A |
| TechSpec Outlet |
N/A |
| GTIN |
00811580033667 |