Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.
Add some horsepower and sound to your Nissan 350Z's VQ35DE engine with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2003--2006 Nissan 350Z and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides maximum gains of 10 hp and 13 tq over the stock intake while maintaining safe air/fuel ratios. This kit is simple to install, making it perfect for some extra punch on the street or autocross course. The Mishimoto Nissan 350Z Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The stock MAF housing is retained which translates into a smooth power band with safe air / fuel ratios. To reduce air intake temperatures (IATs), a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The heatshield bolts right up to the stock inlet duct on the front support to draw in the maximum amount of outside air into the filter. The heatshield also comes fully assembled with protective rubber strips to fully seal it from hot engine bay heat and prevent any vibrations during operation. The Mishimoto high-flow air filter features an integrated venturi and center inlet stack for smooth, high velocity airflow. The large filter provides 271-percent greater surface area over stock and provides proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Along with an upgrade in power, this intake also provides an aggressive and deep-sounding intake tone that is a huge improvement over the stock intake. The Mishimoto Nissan 350Z Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty.
- Dyno-proven maximum gains of up to 10 whp and 13 wtq on the stock tune
- High-flow air filter with integrated velocity stack provides sharp throttle response and improves airflow
- 271-percent increase in air filter surface area
Application Summary:
| Year |
Make/Model |
| 2003-2006 |
Nissan 350Z |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB EO Number |
D-759-1 |
| Color |
Black, Black |
| Country of Origin (Primary) |
CN |
| Emission Code |
Legal US |
| Feature Bullet 1 |
Direct fit for 2003--2006 Nissan 350Z |
| Feature Bullet 2 |
Dyno-proven maximum gains of up to 10 whp and 13 wtq on the stock tune |
| Feature Bullet 3 |
High-flow air filter with integrated velocity stack improves airflow |
| Feature Bullet 4 |
271 percent increase in air filter surface area |
| Feature Bullet 5 |
Installs in less than 30 minutes with no need to remove the front bumper or splash guard |
| Filter Color |
Red |
| Filter Material |
Multi-layered cotton |
| Finish |
Powder-Coat, Powder-Coat |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8481809050 |
| Hazardous Material Code |
N |
| Hose Color |
Black |
| Hose Material |
Aluminum |
| Install Difficulty |
2 |
| Installation Difficulty |
2 |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminum, Aluminum |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| SellingPoint01 |
Direct fit for 2003-2006 Nissan 350Z |
| SellingPoint02 |
Dyno-proven maximum gains of up to 10 whp and 13 wtq on the stock tune |
| SellingPoint03 |
High-flow air filter with integrated velocity stack provides sharp throttle response and improves airflow |
| SellingPoint04 |
271-percent increase in air filter surface area |
| SellingPoint05 |
Black powder-coated heatshield seals perfectly to the air inlet duct on the front bumper and draws cold air from the front of the vehicle |
| SellingPoint06 |
Heatshield comes with protective rubber strips to eliminate noise causing vibrations |
| SellingPoint07 |
No tuning required |
| SellingPoint08 |
Highly aggressive intake tone under acceleration |
| SellingPoint09 |
Installs in less than 30 minutes with no need to remove the front bumper or splash guard |
| SellingPoint1 |
Direct fit for 2003-2006 Nissan 350Z |
| SellingPoint10 |
Fits with stock or Mishimoto Nissan 350Z Radiator |
| SellingPoint11 |
Designed in Delaware, USA and filter made in USA |
| SellingPoint12 |
Mishimoto Lifetime Warranty |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| SellingPoint2 |
Dyno-proven maximum gains of up to 10 whp and 13 wtq on the stock tune |
| SellingPoint3 |
High-flow air filter with integrated velocity stack provides sharp throttle response and improves airflow |
| SellingPoint4 |
271-percent increase in air filter surface area |
| SellingPoint5 |
Black powder-coated heatshield seals perfectly to the air inlet duct on the front bumper and draws cold air from the front of the vehicle |
| SellingPoint6 |
Heatshield comes with protective rubber strips to eliminate noise causing vibrations |
| SellingPoint7 |
No tuning required |
| SellingPoint8 |
Highly aggressive intake tone under acceleration |
| SellingPoint9 |
Installs in less than 30 minutes with no need to remove the front bumper or splash guard |
| TechSpec Air Filter Part Number |
MMAF-3005S |
| TechSpec Applications |
2003-2006 Nissan 350Z |
| TechSpec Caution |
N/A |
| TechSpec Chassis Codes |
Z33 |
| TechSpec Engine Codes |
VQ35DE |
| TechSpec Filter Diameter |
3 |
| TechSpec Includes |
(1) Aluminum Intake Pipe with CNC MAF Adapter--(1) High-Flow, Oiled Filter--(1) Heat Shield w/ Protective Edging--(1) 60-80mm Worm-Gear Clamp (included with air filter)--Hardware--Mishimoto Lifetime Warranty |
| TechSpec Note |
This intake only fits 2003-2006 350Z engines with the VQ35DE engine only. This will not fit 2007-2008 models with the VQ35HR Engine.----Power gains may vary depending on any other engine modifications done to the vehicle, atmospheric conditions, ambient temperature, and the mileage of the vehicle. You may or may not witness the maximum published gains from this air intake.----For the best performance from your Mishimoto intake, we recommend cleaning and re-oiling your oiled air filter every 10,000–15,000 miles during normal driving. If you frequently drive in dusty or off-road conditions, inspect the filter more often and service it whenever it appears dry or heavily coated with debris.----Filter re-oil is not included in Lifetime Warranty. |
| GTIN |
00748354023350 |
